How To Open Bootloader Mode On Itel A48 Access

Press the Power button once to select it. Your device will now enter Bootloader/Fastboot Mode. Method 2: Using ADB & Fastboot Commands (For Advanced Users) This method requires USB Debugging to be enabled on your phone.

Release both buttons. You are now in Factory Mode or SPD Upgrade Mode – this is the bootloader-equivalent interface for Spreadtrum (Unisoc) chipsets used in the A48.

Connect your phone to your PC via USB cable. How to Open Bootloader Mode on ITEL A48

The Bootloader is a low-level piece of code that runs before the operating system (Android) on your ITEL A48. Accessing Bootloader Mode is essential for advanced operations like installing custom ROMs, gaining root access, or unbricking your device.

Type the following command and press Enter: Press the Power button once to select it

Use the Volume Down button to navigate to the option labeled "Bootloader" or "Fastboot" (if available).

Keep holding both buttons until the screen turns on. You will see the ITEL logo, then a dark screen with small text. Release both buttons

Power off your ITEL A48 completely. Wait 10 seconds.