Htri Heat Exchanger Design 〈FRESH ⟶〉

Better. U climbed to 250. But pressure drop on the shell side spiked—from 40 kPa to 95 kPa, exceeding the 70 kPa limit. Trade-off city.

Elena reduced unsupported tube length by adding support plates. She increased tube wall thickness from 1.65 mm to 2.11 mm. HTRI’s vibration analysis tab recalculated: frequency ratio now 1.8 (safe above 1.2). Red warning turned yellow, then green. htri heat exchanger design

She hit send at 2:17 AM. The next morning, the lead process engineer approved it without revisions. Fabrication started six weeks later. When the exchanger was commissioned, field data matched HTRI’s prediction within 1.5%. Better

Final run: outlet crude temperature: 248°C, U = 291 W/m²·K, pressure drops shell/tube: 58/31 kPa, fouling resistance: 0.00035 m²·K/W. Within all limits. Trade-off city

She clicked . HTRI produced a 47-page document: performance curves, tube counts, nozzle schedules, even a 3D view of the baffle arrangement. Elena attached a note: “Design X-7712. Double-segmental baffles, 35% cut, 3 baffle spacings. Vibration safe. Recommend U-tube bundle variant for future cleaning.”