This post is for educational and informational purposes. Always ensure you own a legitimate license for the software and maps before downloading. The Ultimate Guide: IGO Primo Truck for Windows CE 6.0 – Download & Installation Published by: The Overland Navigator Team Reading Time: 5 minutes
[device] type="GenericCE" ; Set your actual COM port and Baud rate. Common: COM2, 4800 or COM1, 9600 [gps] port="2" baud="4800" [truck] ; Enable truck attributes allowed_vehicles=1 monitored_vehicles=1 ; Define your truck (Example: 40 ton, 4.2m high) default_truck_height=4200 default_truck_width=2550 default_truck_length=16500 default_truck_weight=40000 default_truck_axles=5 Igo Primo Truck Windows Ce 6.0 Download
It is stable, works without the internet, and the truck profiles are surprisingly accurate. However, the download process is fiddly, and finding new maps requires digging through forums. This post is for educational and informational purposes
SD Card Root/ ├── IGO/ │ ├── content/ (Maps, POIs, Buildings) │ ├── license/ (The .lyc files) │ ├── skin/ (Truck specific skins) │ ├── save/ (Profiles and routes) │ └── sys.txt (The master config file) ├── MobileNavigator/ │ └── MobileNavigator.exe (The renamed Primo.exe) └── autorun.exe (Usually not needed for SD boot) WinCE units look for a specific .exe name. Most Chinese units require the file to be named MobileNavigator.exe inside a folder called MobileNavigator . You will likely need to rename the Primo.exe file. Step 3: Configure the sys.txt File Open the sys.txt file in Notepad. This is the brain of the setup. For trucking, you must edit this section: Common: COM2, 4800 or COM1, 9600 [gps] port="2"