Jis H 5114 Pdf Here
1. Overview JIS H 5114 is a Japanese Industrial Standard that specifies the requirements for zinc alloy die castings . The standard covers the chemical composition, mechanical properties, manufacturing methods, and inspection criteria for zinc alloy castings produced primarily by the die-casting process.
| Element | ZDC1 (wt%) | ZDC2 (wt%) | |---------|------------|------------| | Aluminum (Al) | 3.5 – 4.3 | 3.5 – 4.3 | | Copper (Cu) | ≤ 0.25 | 0.75 – 1.25 | | Magnesium (Mg) | 0.03 – 0.06 | 0.03 – 0.06 | | Iron (Fe) | ≤ 0.10 | ≤ 0.10 | | Lead (Pb) | ≤ 0.004 | ≤ 0.004 | | Cadmium (Cd) | ≤ 0.003 | ≤ 0.003 | | Tin (Sn) | ≤ 0.0015 | ≤ 0.0015 | | Zinc (Zn) | Remainder | Remainder | The standard specifies minimum mechanical properties for separately cast test specimens (not taken from the casting itself, unless agreed upon): jis h 5114 pdf
| Grade (Symbol) | Comparable UNS / ASTM | Key Characteristics | |----------------|------------------------|----------------------| | | UNS Z33520 (Alloy 3) | General-purpose, good ductility, excellent finishing characteristics | | ZDC2 | UNS Z35530 (Alloy 5) | Higher strength and hardness than ZDC1, good wear resistance | Note: Older versions of the standard may have included ZDC3 (Alloy 2) but modern revisions focus on ZDC1 and ZDC2 due to better long-term dimensional stability. 3. Chemical Composition Requirements The standard strictly limits impurities (especially lead, cadmium, and tin) to prevent intergranular corrosion and aging-related dimensional changes. | Element | ZDC1 (wt%) | ZDC2 (wt%)
Zinc alloys are widely used in die casting due to their excellent fluidity, high dimensional accuracy, good mechanical strength, and relatively low melting point, which extends die life. JIS H 5114 primarily covers two major grades of zinc alloys for die casting, often referenced as: Zinc alloys are widely used in die casting
